Leica T-Probe, the “Walk-Around” armless wireless device for probing of hidden, hard-to-reach points and measuring of up to 9 cars in one setup with minimal setup times, sets new standards by increasing accuracy, offering a ten-fold increase in point acquisition rate and providing user-assignable multi-function buttons.
Small, light, user-friendly, and more accurate than any other hand-held probe in the world, the Leica T-Probe gives you more than 6 Degrees of Freedom: It gives you the right way to measure. Now featuring longer styli, Leica T-Probe reaches up to 30 m (98 ft) in any dimension.
PowerLock: For the first time in the history of laser trackers, the laser beam moves to the user, not the other way around.
Smaller, lighter and more convenient than comparable solutions
Largest armless operation measurement volume of up to 30 m (98 ft), reducing inspections by min. 50%
Wider acceptance angle than any comparable system: pitch ±45°, yaw ±45°, roll 360°
Battery-powered for wireless operation and increased productivity
User-asignable multi-function buttons for individual application functionality for all buttons
One-hand operation with left/right-hand functionality
Renishaw-compatible with a wide range of styli available, incl. 100 mm, 200 mm and longer
Visual feedback for battery, in-view and in-distance status and for process information
Acoustic process information feedback
Insensitive to environmental light
Point rate output of 1,000 points per second
Tracking speed > 1 m/s
Measurement uncertainty of 3D Point (MPE): U3d = 100 µm if under 7 m (0.004” if under 23 ft), U3d = 30 µm + 10 µm/m if greater than 7 m (0.0012” + 0.00012”/ft if greater than 23 ft)
Measurement uncertainty of spatial length (MPE): Ul = ± 60 µm if under 8.5 m (± 0.0024” if under 27.9 ft), Ul = ± 7 µm/m if greater than 8.5 m (± 0.00008”/ft if greater than 27.9 ft)
Measurement uncertainty of sphere radius (MPE): Ur = ± 20 µm + 2 µm/m (± 0.0008” + 0.00002”/ft)
Precise quick release and automated stylus recognition for exchanging styli without calibration
New Accessories:
PROBEscanner: Turns your Leica T-Probe into the most cost efficient scanning solution.
Need more information?
Do you need more information on this product?
Please choose what you are looking for, select your country, then click on [Proceed] to get your nearest Leica Geosystems contact:
.jpg)
